=========================================================
 License Agreement for DocuPrint 2050
=========================================================
1. PROPRIETARY RIGHTS: Title, ownership rights, and intellectual
   property rights in the SOFTWARE shall remain in Fuji Xerox and its
   third party suppliers.  You have no rights in the SOFTWARE except
   as expressly granted in accordance with this agreement.

2. LICENSE:  Under this agreement, you are granted a non-exclusive
   license to use the SOFTWARE for the purpose of using with
   compatible Fuji Xerox products in Japan.  You are not permitted to
   (1) assign, sublicense, sell, rent, lease, convey, or transfer the
   SOFTWARE to any third party by any tangible media such as floppy
   disk, magnetic tape, or CD-ROM, (2) distribute the SOFTWARE on a
   network or by a telephone line available to the public or (3)
   alter, modify, decompile, disassemble, reverse engineer, or create
   derivative works based on the whole or any part of the SOFTWARE.
   If any direction on usage or restriction for the SOFTWARE is
   expressly specified in this web site, you are required to follow
   such direction.

3. TERM: This agreement is effective upon installing the SOFTWARE
   until you terminate the agreement by destroying the SOFTWARE.
   This agreement will also terminate if you fail to abide by any
   terms of this agreement.  In case of termination, you must
   promptly destroy the SOFTWARE.

4. LIMITED WARRANTIES: THE SOFTWARE IS SUPPLIED STRICTLY ON AN 'AS 
   IS' BASIS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR 
   IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF 
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH 
   RESPECT TO THE SOFTWARE. YOU ARE RESPONSIBLE FOR CHOOSING, 
   MAINTAINING AND MATCHING OTHER HARDWARE AND SOFTWARE COMPONENTS 
   IN COMBINATION OF THE SOFTWARE. IN NO EVENT, SHALL FUJI XEROX, 
   FUJI XEROX CHANNEL PARTNERS, AUTHORIZED DEALERS AND THEIR THIRD 
   PARTY SUPPLIERS BE LIABLE FOR ANY LOSS OR DAMAGE INCLUDING 
   INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGE, ARISING FROM USE OF
   OR INABILITY TO USE SOFTWARE, OR ANY MODIFICATION OF THE SOFTWARE. 
 
5. EXPORT CONTROL: You are not allowed to export the SOFTWARE in part
   or whole, directly or indirectly, in violation of any 
   restrictions, laws or regulations imposed by the government of 
   Japan or any other relevant countries, and are required to obtain 
   necessary approval prior to exporting the SOFTWARE.

=====================================================================
Additional Information:
DocuPrint 2050
Printer Driver Ver. 2.5.35 for
Microsoft(R) Windows(R) 2000
Microsoft(R) Windows(R) XP
Microsoft(R) Windows Server(R) 2003
Microsoft(R) Windows Vista(R)
Microsoft(R) Windows Server(R) 2008
 Microsoft(R) Windows(R) 7
Microsoft(R) Windows(R) 8
(C) Copyright Fuji Xerox Co., Ltd. 2013 All rights reserved.
=====================================================================

This document provides information about the printer driver on the 
following items:
1. Requirements
2. File Configuration
3. Installation
4. Version Improvements
5. Limitations
6. Inquiries

-----------------
 1. Requirements
-----------------
1. This printer driver operates on a computer running 
    Microsoft(R) Windows(R) 2000
    Microsoft(R) Windows(R) XP
    Microsoft(R) Windows Server(R) 2003
    Microsoft(R) Windows Vista(R)
    Microsoft(R) Windows Server(R) 2008
    Microsoft(R) Windows(R) 7
    Microsoft(R) Windows(R) 8

   Please note that this printer driver operates on a 32-bit x86-based 
   microprocessor (Intel 80486/25 and above) and an upward-compatible 
   processor
   (For clock speed and memory of the CPU, make sure that the system 
    configuration is recommended by the operating system.)  

2. This printer driver works correctly with the combinations of the 
   below mentioned printer software versions.  

    * DocuPrint 2050	Controller ROM Version 2005.07.12 or later


--------------------
2. File Configuration
--------------------
fxhhadcr.dl_
fxhhajdm.dl_
fxhhaz.cd_
fxhhaz.cfg
fxhhaz.cn_
fxhhaz.hl_
fxhhaz.xr_
Fxhhazi.inf
fxhhazil.dl_
fxhhazim.dl_
fxhhazir.xr_
fxhhaziu.dl_
fxhhazp1.dd_
fxhhazzn.dl_
fxhzdcis.dl_
fxhzdczd.dl_
fxzddmif.dl_
Fxhhazi.cat
readme.txt


-----------------
 3. Installation
-----------------

Important
----------
* Close all the running applications before installing the printer 
  driver.  
* Always reboot the computer after installing an upgraded version of 
  the printer driver.  
* If you have deleted an older version of the printer driver, always 
  reboot the computer before installing the new version.  
* The installation procedures are written with the assumption that
  standard settings have been configured in Windows.
  The procedures may differ if the start menu or folder options have
  been changed.  
* You may not be able to install correctly if installation is made 
  using Power User rights. Re-install as an Administrator.
* Installation may not be successful if this driver is not installed
  using the following procedure.
* Please refer to the following section of this chapter for driver 
  deletion method under Windows Vista, Windows Server 2008, 
  Windows 7, and Windows 8.
   * About driver deletion method (When using Windows Vista,
     Windows Server 2008, Windows 7, or Windows 8)
* Please refer to the following section of this chapter for installation 
   method using plug-and-play under Windows 7 and Windows 8.
   * About driver installation method using plug-and-play 
     (When using Windows 7 or Windows 8)

1) Double-click the downloaded compressed file (.exe format) to 
   decompress.  
2) Activate the "Add Printer Wizard".  
   2a) For Windows 2000, click the "Start" button.  Point to
       "Settings" and click "Printers".  
       Double-click the "Add Printer" icon.  
   2b) For Windows XP, click the "Start" button.  Point to
       "Settings" and click "Printers and Faxes".  
       Click the "Add a printer" icon.  
   2c) For Windows Server 2003, click the "Start" button.  Point to 
       "Settings" and click "Printers and Faxes".  
       Double-click the "Add Printer" icon.  
   2d) The following steps are available for use when installing 
       printer under Windows Vista and Windows Server 2008.
       * Click "Start" button and then click "Control Panel".
       * Select "Printer" in "Hardware and Sound" then select 
       "Add a Printer".
     <Caution> If you are using Windows Server 2008, right-click in
     "Printers" folder and select "Add Printer" in 
     "Run as administrator".
   2e) The following steps are available for use when installing 
        printer under Windows 7.
       * Click "Start" button and then click "Devices and Printers".
       * Select "Add a printer" in "Devices and Printers".
   2f) The following steps are available for use when installing 
        printer under Windows 8.
       * Go to "Control Panel" >"Hardware and Sound" > "Devices and Printers".
       * Select "Add a printer" in "Devices and Printers".
3) Specify the printer connection.
   * For a local printer:
     Specify the local printer going through the menu displayed on Windows.
     Proceed to step 4).  
4) Specify the port to be used for the printer.  
   Create a port if there is no output port.
5) Click "Have Disk" from the "Add Printer Wizard" screen.  
   The "Install From Disk" screen is displayed.  
   Specify the directory containing the uncompressed files in step 1)
   in the "Copy manufacturer's files from" box.  Click "OK".  
6) A list of printers is displayed.  Select the desired printer.  
   If the selected printer is already installed, a message asking 
   whether to replace the existing driver is displayed.  
   When installing a new version of the printer driver, select 
   "Replace existing driver" or "Replace the current driver".
   The older version of the driver cannot be deleted if it is used 
   in an application.  In this case, close the application. 
7) A dialog box for specifying the printer name is displayed.  
   To change the printer name, enter any name in the "Printer name" 
   box. 
   If other printers are installed, a message asking whether to set 
   this as the default printer is shown.  
   7a) When using Windows 2000, Windows XP, or Windows Server 2003,
       please click "Yes" button if you want to set a printer as 
       default.
   7b) When using Windows Vista, Windows Server 2008, Windows, 7 or Windows 8,
       please check the "Set as the default printer" checkbox if you want to
       set a printer as default. 
       As the following steps are slightly different for Windows Vista,
       Windows Server 2008, Windows 7, and Windows 8, please proceed to
       step 13).
8) Specify whether to share this printer with other network users.  
9) A dialog box specifying whether to print the test page after 
   installation is shown.
    To perform test printing on the print driver, load letter paper
    to the printer, select "Yes" and then "Next". 
    Select "No" and click "Next" if you do not wish to print the test
    page.
10) A dialog box to confirm the settings is displayed.  Click 
    "Finish" after confirming the settings.  
11) A dialog box to confirm the continuation of installation may be displayed.
    If the dialog box is not displayed, go to the next step.
    11a) For Windows 2000, a message about the Electronic Signature
         cannot be found may be displayed but this does not cause
         functional problem.  
         Click "Yes". 
    11b) For Windows XP and Windows Server 2003, a message saying
         that it did not pass the Windows Logo Test may be displayed
         but this does not cause functional problem.
         Click "Continue Anyway". 
12) The necessary files are copied and a new printer icon is 
    created.  
    If you have printed the test page, a printer test result 
    confirmation message is displayed.  
    This completes the installation.  
13) For Windows Vista, Windows Server 2008, Windows 7, and Windows 8,
    this is the start of the driver installation. 
    * The installation confirmation screen published by Fuji Xerox Co., Ltd.
      may be displayed, but it is not a functional problem.
      Click "Install".
    * You can continue with the installation in the "User Account Control"
      dialog box.
    Click the "Continue" button to proceed. For users without 
    administrator rights who wish to install the driver, 
    select the option of user with administrator rights,
    enter the password and then click "OK". 
    "User Account Control" dialog is not displayed when the driver is 
    installed through "Run as Administrator".
14) Please ignore the pop-up dialogue of "Windows can't verify 
    the publisher of this software" if it appears.  When you find the dialog, 
    click "Install this driver software anyway." to continue with
    the installation.
     * A message "Windows can't verify the publisher of this driver software"
       appears depending on the version of Windows.
15) Make sharing settings.  
    If the driver is installed with administrator rights, a dialog to make 
    sharing settings appears.  Make sharing settings in this dialog and 
    click "Next".  
16) The driver installation is completed.
    Click "Print a test page" button if you want to print a test page. 
    Please refer to step 9) for the details of test page printing.
    For Windows 7 and Windows 8, when other printers are already installed, 
    the "Set as the default printer" checkbox is displayed.  
    If you want to set the printer as default, check the checkbox, and 
    click "Finish".  

About driver deletion method 
(When using Windows Vista, Windows Server 2008, Windows 7, or Windows 8)
-------------------------------------------------------------
To remove drivers from system completely, please delete drivers and driver 
package going through the following steps.

  <<Windows Vista, Windows Server 2008>>
   * Click "Start" and open "Control Panel", then select "Printer" in
     "Hardware and Sound" panel.
   * Delete printer icon in "Printers" folder.
   * Right-click in "Printers" folder and select "Run as 
     Administrator".
     Click "Server Properties" then "Printer Server Properties" 
     window is displayed.
   * Select the driver to be deleted from the "Drivers" tab and click 
     "Remove" button.
   * Select "Remove driver and driver package.", then click "OK" 
     button.
   * When the driver is in use, a message appears and the driver package
     may not be able to be deleted.  In such case, reboot the computer and 
     try to delete again.   
   * Restart the computer.

  <<Windows 7, Windows 8>>
  <<Windows 7>>
  * Click "Start" and select "Devices and Printers".  
  <<Windows 8>>
  * Go to "Control Panel" > "Hardware and Sound" and select "Devices and 
    Printers".
  * Click the printer icon in the "Devices and Printers" folder, 
    and select "Remove device" menu to delete it.   
  * Click any of the icons displayed in "Printers and Faxes" in the
    "Devices and Printers" folder and select "Print server properties".  
  * Click the "Drivers" tab to open it.  
  * When the "Change Driver Settings" button is displayed, click it.  
  * Select a driver to delete from the "Drivers" tab and click the "Remove" 
    button.  
  * Select "Remove driver and driver package" and click the "OK" button.  
  * When the driver is in use, a message appears and the driver package
    may not be able to be deleted.  In such case, reboot the computer and 
    try to delete again.   
  * Restart the computer.

About driver installation method using plug-and-play
(When using Windows 7 or Windows 8)
-------------------------------------------------------------
When a driver is installed using plug-and-play, it may not
be installed properly.  In such case, follow the steps below to reinstall 
the driver. 

  * Select "Devices and Printers".
  * In the "Devices and Printers" folder, right-click the icon of this 
    printer and select "Properties".  
    *When the icon is disabled and inoperable, turn off/on the printer
     and make sure the printer is connected securely with a cable.  
  * Select this printer in "Device Functions" in the "Hardware" tab, and
    click the "Properties" button to open the Properties dialog. 
  * Click the "Change settings" button and open a new "Properties" dialog.  
  * In the new "Properties" dialog, open the "Drivers" tab, and click the 
    "Update driver" button to open the "Update driver software" dialog.  
  * Select "Browse my computer for driver software" and specify 
    the driver's location under "Search for driver software in this 
    location:". Click "Next".
    *Please refer to the steps for driver installation using "Add Printer 
    Wizard" for how to prepare the driver.   
  * When a message stating that the driver has been updated successfully,  
     click "Close" to close the dialog.  
     Now, the driver has been reinstalled successfully.  

-----------------------
4. Version Improvements
-----------------------
This section describes the modifications made for each upgraded 
version.  

[2.5.35]
Windows 8 has been supported.

[2.5.30]
Windows 7 has been supported.

---------------
 5. Limitations
---------------
===========================
Driver-Specific Limitations
===========================
1. <Application common> White lines and black streaks that are not 
displayed are printed.

As application's calculation method to represent straight lines and 
rectangles is different from that of printer, gap or overlap may occur
on border of graphics.

*This problem may be improved by changing margin as follows:
Select [Basic] tab > [Margin Shift/Margins] > [Margins].

2. <Application common> Characters may be changed to strange symbols
or missing.
When application specifies fonts not installed in PC, characters may
be changed to strange symbols or may be lost on display or on prints.

When fonts specified by application are not installed in PC, OS replaces
them with appropriate fonts, and displays/prints them. 
But, if the replaced fonts are not appropriate, this problem occurs.

*Change fonts to those installed in PC from application.
*The problem may be avoided by deleting unnecessary fonts from PC.

3. <Application common> Output size and margin are not enabled with
a combinaiton of [Margins] and [EMF Spooling].

When specified output size is different from document size, the printer
may request a user to select document size or A4 size.  Also, when
margin is changed, printed images may be enlarged.

*Do not select [Margins] and [EMF Spooling] at the same time. 
*Make either [Margins] or [EMF Spooling] OFF.

4. <Application common> Halftone reproduction
When halftone or dot patterns are selected, they may not be reproduced
accurately.  (Patterns are lost, patterns are different, halftone is 
overlapped, etc.) This problem occurs on all types of document.

This problem occurs because screen patterns interfere with patterns of
halftone, etc.

This problem may be improved by taking the following steps:
*Select [Detailed Settings] tab > [Resolution]> u300dpiv or [200dpi].
*Select [Detailed Settings] > [Draw the pattern with fine lines as per
the resolution] > [ON].
*Select [Resolution] for print mode.

5. <Additional driver>An additional driver for server client print 
(substitution driver)  When reinstalling it, "a chosen printer driver 
isn't found",  The dialogue is sometimes indicated.

When the dialogue was indicated, please push down a 
"reexecution" button during the dialogue.

6. <Application common>When I print without establishing print by a 
driver property when printing by a paper size bigger than A3 (print, 
impossible paper size) by application, it'll be an error on the printer 
side.

Please set print as a possible paper size again by a printer in a print 
setting screen of a printer driver or application.

7. <Custom Paper Size>Administrator rights are necessary for changing 
the setting ofCustom Paper Size.  
When using Windows Vista or Windows Server 2008, please modify
printer properties according to the following steps.
* Select the printer from the printer folder.
* Right-click the printer, click "Run as administrator" and then 
  select "Properties".
* Click the "Continue" button in the "User Account Control" dialog 
  box, and from the displayed properties, configure the settings.

For Windows 7, select the printer from the "Devices and Printers" folder,
and select "Properties".  On the "Sharing" tab, click the "Change 
Sharing Options" button.
After that, specify custom page size.  

8. <Application common> Features of printing with Header/Footer and 
Watermark
On Windows 8, Header/Footer and Watermark may not be printed even if 
[Print Header/Footer] and [Watermark] are specified.
To make them function, set [EMF Spooling] to [On] on the 
[Detailed Settings] tab.

9. <Application common> Please print on Windows 7 or Windows 8 after 
turning on the power of the printer. Or it may not print after that. 
In the case, please restart your computer.

===========================
Application Limitations
===========================
1. <Netscape(R) 7.1> Application zoom is not enabled.
Application zoom selected from driver is not enabled.

*This is Netscape specification.
Set Netscape options as follows:
FilePage SetupFormat and OptionsShrink To Fit Page Width>OFF

2. <CorelDraw10>Graphics are not printed.
Graphics of CorelDraw 10J may not be partially printed.

This problem occurs because application data may not be sent when
printer driver high resolution is selected. 

*Graphics may be printed by taking the following steps:
Select [Detailed Settings] tab > [Other Settings (Graphics Settings)] 
> [Resolution] > [300dpi] or [200dpi].

--------------
 6. Inquiries
--------------

*** Installation from downloaded data via the web site
You can download the latest driver from our web site.  
Communication charges will be borne by the customer.  

    The latest software is available on our web site.

         http://www.fxprinters.com/

    Communication charges will be borne by the customer.

=====================================================================
"Microsoft", "Windows", "Windows Vista" and  "Windows Server" are 
registered trademarks of Microsoft Corporation in the United States 
and other countries.
Other product names and company names stated herein are registered 
trademarks or trademarks of the respective companies.