Home > Troubleshooting > Machine Information > Reset Functions > Settings Reset

Settings Reset

DocuPrint P268 b/DocuPrint P228 db
DocuPrint P268 d/DocuPrint P268 dw

DocuPrint P268 b/DocuPrint P228 db

Use the Settings Reset function to reset all machine settings to the settings originally set at the factory.

Fuji Xerox strongly recommends you perform this operation when you dispose of the machine.

Unplug all the interface cables before you perform a Settings Reset.
  1. Press and hold to turn the machine off.
  2. Make sure that the front cover is closed and the power cord is plugged in.
  3. Hold down 执行 (Go) as you press to turn on the machine. Keep 执行 (Go) pressed down until the 墨粉 (Toner), 感光鼓 (Drum), and 纸张 (Paper) LEDs light up.
  4. Release 执行 (Go). Make sure that all LEDs turn off.
  5. Press 执行 (Go) ten times.
    The machine restarts automatically.

DocuPrint P268 d/DocuPrint P268 dw

  1. Disconnect the network cable from the machine. If you do not, network settings such as IP address will not be reset.
  2. Press or to select the Reset Menu option, and then press OK.
  3. Press and Back at the same time.
  4. When Settings Reset appears, press OK.
  5. When Restart Printer? appears, press OK.
    The machine restarts automatically.
Related Information

Go to top of page