                WinRAR - What's new in the latest version


   Version 5.20

   1. If Windows User Account Control prevents extracting or archiving
      commands to create files in system protected folders, WinRAR attempts
      to start its another copy with administrator privileges to complete
      the operation. It is necessary to confirm privileges elevation
      in response to User Account Control prompt to allow such second
      WinRAR copy to run.

   2. You can drag files in Explorer with right mouse button, drop them
      to some folder and select WinRAR archiving commands in context menu
      to create an archive with these files in the destination folder.

   3. It is possible to use WinRAR.ini file instead of Registry to store
      WinRAR settings. You may prefer such approach if you plan to install
      WinRAR to removable media, such as USB flash drive, and then run it
      on different computers.

      See "WinRAR.ini file" topic in "Configuration settings" chapter
      of WinRAR help for details.

   4. Added extraction support for ZIP and ZIPX archives using 
      XZ compression algorithm.

   5. If ZIP or ZIPX archive contains any compression algorithms except
      usual "Store" or "Deflate", algorithm names are displayed
      in "Version to extract" field of archive information dialog.
      Algorithms with names unknown to WinRAR will be assigned "m<num>"
      name, where "num" is a compression algorithm numeric identifier.

   6. "Open with WinRAR" command is available in Windows context menus
      for archive formats supported by WinRAR. It can be turned off
      with "Open with WinRAR (for usual archives)" option in WinRAR
      "Settings/Integration/Context menu items..." dialog.

   7. Command line RAR can read the default set of switches from rar.ini
      file stored in RAR program folder. Previously it was possible to
      define only the same set of switches for all RAR command with
      "switches=<switches>" string. Now rar.ini also allows to specify
      separate switch sets for individual RAR commands using
      the following syntax:

      switches_<command>=<any RAR switches, separated by spaces>

      For example:

      switches_a=-m5 -s
      switches_x=-o+

   8. Command "ch" supports switches -tl, -cu, -cl also for ZIP archives.
      Previously "ch" allowed these switches only for RAR archive format.

   9. For archive formats lacking file time information, such as .bz2,
      .xz and .Z, WinRAR sets container archive modification time
      to extracted files. It does not apply to tar.bz2, tar.xz and tar.Z,
      which use file time stored in tar headers.
   
  10. "Keep broken files" extraction option is supported for bzip2 archives.

  11. WinRAR icon in Windows context menus is scaled up correctly
      in high DPI screen modes such as 150% or 200% of normal text size.

  12. It is possible to disable WinRAR "Benchmark" command with
      "Benchmark" variable of HKEY_CURRENT_USER\Software\WinRAR\Policy
      Registry key. In multi-user environment "Benchmark" command might
      abuse shared computational resources. See "Registry variables" topic
      in "Configuration settings" chapter of WinRAR help for more details.

  13. Additionally to "sfxcmd" variable containing the entire command line,
      SFX module sets "sfxpar" variable containing command line parameters
      only, without leading SFX module name. These variables are set before
      starting a program specified in "Setup" command.

  14. File overwrite prompt in console RAR displays the size and modification
      time for existing and new files.

  15. When archiving from stdin with -si switch, RAR sets the current system
      time to modification time of archived file. Previous version did not
      set this time at all.

  16. It is possible to use -si and -v<size> switches together. Previous
      versions did not allow to create volumes when archiving from stdin.

  17. Warning is issued when starting unpacking 4 GB or larger file
      from RAR or ZIP archive to FAT32 patition, so user may cancel
      the operation. FAT32 does not support files of such size.

      Also this warning is issued when starting to create RAR archive
      with "Store" (-m0) method if estimated archive size is 4 GB or more.

  18. "Select all" button in "Settings/Integration" dialog is renamed to
      "Toggle all". Now it deselects archive formats if all they are
      already selected.

  19. "Delete archive" extraction option correctly removes all .zip and .7z
      volumes. Previously it removed only the first volume in the set
      for these archive formats.


   Version 5.11

   1. WinRAR can unpack TAR archives containing folders with pax
      extended headers. Previous versions failed to unpack them.

   2. "Keep broken files" extraction option is supported for 7-Zip archives.

   3. Bugs fixed:

      a) WinRAR 5.10 did not set "hidden", "read-only" and "system"
         file attributes when unpacking ZIP archives;

      b) WinRAR 5.10 failed to update self-extracting RAR archives
         containing nested ZIP archives stored without compression;

      c) ZIP archive created with "Do not store paths" option
         included unnecessary empty name records for folders;

      d) archived files could have 1 hour modification time error
         in Windows XP;

      e) deleting a file in RAR5 solid archive containing files stored
         with -ver switch caused such files to lose version information;

      f) black rectangles were displayed instead of toolbar buttons
         in 16- and 24- bit screen color modes and Windows custom text size
         larger than 100%.

   
   Version 5.10

   1. Added extraction support for ZIP and ZIPX archives using
      BZIP2, LZMA and PPMd compression.

   2. Added extraction support for 7z split archives
      (.7z.001, .7z.002, ...).

   3. Added support for AES-NI CPU instructions allowing to improve
      RAR encryption and decryption performance.

   4. Default theme images are scaled up with better quality
      in high DPI display mode.

   5. Environment variables, such as %temp%, can be used
      in "Files to add" field of archiving dialog.

   6. Switch -ai can be used when creating RAR archive,
      so predefined values, typical for file and folder,
      are stored instead of actual attributes.
      Previously this switch could be used only when extracting.


   Version 5.01

   1. RAR 5.0 archives can include an optional quick open information
      controlled with -qo[-|+] switch or "Quick open information" options
      group in archiving dialog. It allows to open the archive contents
      in WinRAR faster.

      This version provides better update performance for archives
      containing both quick open information and service records,
      such as NTFS file security. Also default parameters of quick open
      information are optimized to achieve faster open time for such archives.

   2. Bugs fixed:

      a) "Find" command could fail when searching text string in .7z archives;

      b) when opening RAR 5.0 archive with encrypted file names stored
         in another such archive, WinRAR could issue an erroneous message
         that password is incorrect. It happened only if passwords to inner
         and outer archives were different. It did not affect extraction,
         all files could be unpacked regardless of this message;

      c) option "Use for all archives" in password dialog did not suppress
         additional password requests for RAR 5.0 archives with encrypted
         file names;

      d) WinRAR address bar did not process correctly environment variable
         based paths, such as %temp%;

      e) storing NTFS file security and alternate data streams did not work
         for file pathnames longer than 260 characters;

      f) "Test" command could erroneously report damaged data in valid
         recovery record if only a part of files in RAR 5.0 archive
         was tested. It did not happen if entire archive contents was tested;

      g) "Test" command erroneously reported errors when verifying
         RAR 4.x Unix symbolic links;

      h) WinRAR "View" command did not work for files inside of BZIP2 archives;

      i) if "High precision modification time" option in archiving dialog
         was turned off, WinRAR did not store the modification time at all
         instead of storing a lower precision time;

      j) destination paths containing .\ or ..\ component did not work
         when extracting non-RAR archives in WinRAR command line mode;

      k) WinRAR failed to unpack multivolume CAB archives.


   Version 5.00

   1. New RAR 5.0 archiving format. You can use "RAR 5.0" option
      in archiving dialog or -ma command line switch to create
      RAR 5.0 archives.
      
      Older software including older WinRAR versions is not able to
      decompress RAR 5.0 archives, so if you plan to send an archive
      to other people, it is necessary to take the compatibility issue
      into consideration. You can select "RAR" instead of "RAR5" option
      in archiving dialog to create RAR 4.x archives compatible with
      previous WinRAR versions.

   2. Changes in RAR 5.0 compression algorithm:

      a) maximum compression dictionary size is increased up to 1 GB
         in 64 bit WinRAR. 32 bit WinRAR version can use up to 256 MB
         dictionary when creating an archive. Both 32 bit and 64 bit
         versions can unpack archives with any dictionary size,
         including 1 GB;

      b) default dictionary size for RAR 5.0 is 32 MB, typically resulting
         in higher compression ratio and lower speed than RAR 4.x 4 MB.
         You can use "Dictionary size" archiving dialog option or -md<size>
         switch to change this value;

      c) -md<size> switch syntax is modified to support larger dictionary
         sizes. Append 'k', 'm' and 'g' modifiers to specify the size
         in kilo-, mega- and gigabytes, like -md64m for 64 MB dictionary.
         If modifiers are not present, megabytes are assumed,
         so -md64m is equal to -md64;

      d) RAR 5.0 format includes Intel IA-32 executable and delta
         compression algorithms, but RAR 4.x text, audio, true color
         and Itanium algorithms are not supported. These excluded algorithms
         are not efficient for modern data types and hardware configurations;

      e) RAR 5.0 decompression can utilize several CPU cores.
         Though not to same extent as in compression algorithm,
         it improves the decompression speed on large files
         with poorly compressible data or when using BLAKE2 checksums.

   3. Changes in RAR 5.0 archive format:

      a) file times are stored as Coordinated Universal Time (UTC)
         instead of former local time, making file exchange among
         several time zones more straightforward;

      b) file names and archive comments use UTF-8 encoding.
   
   4. RAR 5.0 recovery record is based on Reed-Solomon error correction
      codes. If recovery record size is large enough, 5% and more,
      the new error correction scheme provides much higher resistance to
      multiple damages comparing to RAR 4.x recovery record.
      Smaller record, such as 1 - 2%, or less random damage type would
      result in less difference between 4.x and 5.0. For single continuous
      damage 4.x and 5.0 efficiency is about the same.

      Additionally to usual data erasures, the new recovery record
      is able to detect deletions and insertions of much larger size
      than in previous RAR versions. Maximum insertion size is several
      megabytes. Maximum deletion size depends on the damage type
      and in some cases can be as large as the recovery record size.
      
      Still, the best recovery performance and efficiency is achieved
      if no deletions and insertions are present, so all data including
      damaged sectors preserve their original positions. Thus, if you use
      some special software to copy an archive from damaged media,
      it is better to choose the mode, when damaged sectors are filled by
      zeroes or any other data instead of cutting them out completely
      from resulting file.

      RAR 5.0 recovery record is more resistant to damage of recovery record
      itself and can utilize a partially corrupt recovery record data.
      Note, though, that "Repair" command does not fix broken blocks
      in recovery record. Only file data are corrected. After successful
      archive repair, you may need to create a new recovery record
      for saved files.

      New recovery record is not based on 512 byte sectors anymore 
      and incorporates more complicated data structures. So it is impossible
      to specify its size in sectors. For RAR 5.0 archives the parameter of
      -rr[N] switch and rr[N] command is always treated as a percent of
      archive size regardless of presence of % character. Typically N%
      recovery record can repair up to N% of continuously damaged data
      and increases the archive size by only slightly more than N%.
      Ability to fix multiple damages is proportional to N.

      We used "Screaming Fast Galois Field Arithmetic Using Intel
      SIMD Instructions" paper by James S. Plank, Kevin M. Greenan
      and Ethan L. Miller to improve Reed-Solomon coding performance.
      Also we are grateful to Artem Drobanov and Bulat Ziganshin
      for samples and ideas allowed to make Reed-Solomon coding
      more efficient.

   5. "Test" command verifies validity of RAR 5.0 recovery record.
      Recovery record is tested after processing all archived files.

      If corrupt archive contains the recovery record, it might be possible
      to repair it even if recovery record validity test is failed.
      "Repair" command attempts to utilize even a partially damaged
      recovery record. So treat the negative recovery record test result
      as a reason to re-create the archive if original files are still
      available, but not as a reason to avoid "Repair" command.

   6. Changes in RAR 5.0 encryption algorithm:

      a) encryption algorithm is changed from AES-128 to AES-256 in CBC mode.
         Key derivation function is based on PBKDF2 using HMAC-SHA256;

      b) special password verification value allows to detect most of
         wrong passwords without necessity to unpack the entire file;

      c) if archive headers are not encrypted ("Encrypt file names" option
         is off), file checksums for encrypted RAR 5.0 files are modified
         using a special password dependent algorithm, to make impossible
         guessing file contents based on checksums. Do not expect such
         encrypted file checksums to match usual CRC32 and BLAKE2 values.
   
   7. RAR 5.0 archives allow to utilize 256 bit length BLAKE2sp hash
      ( https://blake2.net ) instead of 32 bit CRC32 as a file checksum.
      Enable "Use BLAKE2 file checksum" option in "Options" page of
      archiving dialog or specify -htb command line switch to use BLAKE2
      checksums.

      While producing slightly larger archives, BLAKE2 can be used
      for file contents identification. If two files have the same
      BLAKE2 value, it practically guarantees that file contents
      is the same. BLAKE2 error detection property is also stronger
      than in much shorter CRC32.

   8. Features removed:

      a) authenticity verification feature did not provide the required
         level of reliability and was removed;
      
      b) switch -en (do not add "end of archive" block) is not supported
         by RAR 5.0 archives, which always have the end of archive block.
         This block helps WinRAR to safely skip external data like
         digital signatures appended to archive;

      c) old style extension based arcname.rNN volume names are not
         supported by RAR 5.0 archives, which use only arcname.partN.rar
         volume names;
      
      d) file comments are not supported anymore both in RAR 4.x
         and RAR 5.0 archives. Console RAR 'cf' command is removed.
         It does not affect the archive comment support, which is present
         in both versions of archive format and is not planned for removal.

   9. "Set password" command and "Dictionary size" option are moved to
      "General" page of archiving dialog.
   
  10. You can use "Save symbolic links as links" option on "Advanced" page
      of archiving dialog to save and restore NTFS symbolic links
      and reparse points as links, so their contents is not archived.
      Command line equivalent of this option is -ol switch.

      Similar option for NTFS hard links is "Save hard links as links".
      Its command line equivalent is -oh switch.

      Both options are available only for RAR 5.0 archive format.
   
  11. Added extraction only support for XZ archive format.
   
  12. Changes in recovery volume processing in RAR 5.0 archive format:

      a) maximum number of RAR+REV volumes in RAR 5.0 format is 65535
         instead of 255;

      b) recovery volume operations are faster than in RAR 4.x;

      c) additionally to recovery data, RAR 5.0 REV files also store
         service information such as checksums of protected RAR files.
         So they are slightly larger than RAR volumes which they protect.
         If you plan to copy individual RAR and REV files to some removable
         media, you need to take it into account and specify RAR volume
         size by a few kilobytes smaller than media size.
  
  13. Maximum path length for files in RAR and ZIP archives is increased
      up to 2048 characters.
  
  14. Command line RAR returns the exit code 11 if it can detect that
      user entered a wrong password. This code can be returned only
      for RAR 5.0 archives. It is impossible to distinguish a wrong
      password and data damage for RAR 4.x archives.

  15. 'v' and 'l' commands display archived file names in the end of line,
      not in that beginning as before. Also some fields previously
      available in 'l' and 'v' output are now shown only by 'lt' and 'vt'.
      
      'vt' and 'lt' commands provide the detailed multiline information
      for every archived file.

      'vta' and 'lta' also include service headers into list.

   16. Now the default charset for filelists in commands like
       'rar a arcname @filelist' is ANSI for both WinRAR and console RAR.
       In previous versions it was ANSI for WinRAR and OEM for console RAR.
       You can use -sc<charset>l switch to override this default.

   17. Internal WinRAR viewer can detect and display files in UTF-8
       and UTF-16 little endian encodings.

   18. UTF-16 little endian encoding is used in RAR and WinRAR log file
       rar.log, so Unicode file names are stored in the log correctly.
       WinRAR automatically truncates the old rar.log file in non-Unicode
       format to avoid mixing different encoding in the same log file.
       In case of console RAR you need to delete the old rar.log manually,
       otherwide RAR will append UTF-16 messages to existing rar.log.

       You can use -sc<charset>g switch to change the default log file
       encoding, such as -scag for ANSI encoding.

   19. Command line 'r' (repair) command can include an optional destpath\
       parameter defining the destination folder for repaired archive:

       rar r archive.rar destpath\
      
   
   Version 4.20

   1. Changes in RAR compression:

      a) RAR general compression algorithm is optimized for better
         utilization of several processor cores. While some speed gain
         is possible even in single processor mode, best results
         are achieved in multi-core environment.

         Speed gain depends on data type and average file size.
         Several cores are utilized more efficiently when compressing
         large files.

      b) we had to increase memory requirements to achieve higher
         compression speed. General RAR compression algorithm allocates
         about 120 MB comparing to 40 MB in WinRAR 4.11;

      c) RAR text compression algorithm cannot utilize several CPU cores
         efficiently, so its performance in multiprocessor environment
         is much lower than for general algorithm. Also its decompression
         speed is much lower than in general algorithm regardless of
         CPU number. So we decided to disable the text algorithm by default.

         If you need maximum possible compression ratio for plain text data
         regardless of speed, you can enable the text compression
         in "Advanced compression parameter" dialog. Press "Compression..."
         button on "Advanced" page of archiving dialog to access it.
         You can also change this option permanently in default compression
         profile;

         In the command line mode the text compression can be enabled
         with -mct switch;

      d) "Fastest" (-m1) compression mode also supports several processor
         cores now. In 4.11 it could use only a single processor core.

   2. RAR general decompression algorithm speed is slightly improved,
      though not to same extent as RAR compression. RAR decompression
      is not able to use several processor cores, so its performance
      does not depend on a number of cores.

   3. Changes in ZIP compression:

      a) now ZIP compression supports several processor cores resulting
         in noticeably higher performance in multi-core environment.
         Single CPU ZIP compression is also faster than in 4.11;

      b) memory use for ZIP compression is increased to about 15 MB.

   4. Recovery volume creating and processing can use several CPU cores
      resulting in higher speed. Though, typically hard drive seek speed
      is a limiting factor for recovery volumes, so this gain is most
      noticeable when working with solid state drive.

   5. Now the allowed <threads> value for -mt<threads> switch is 1 - 32,
      not 0 - 16 as before.

   6. "Find files" command can search data in 7-Zip archives.
      Previously "Find files" did not support .7z archive format.

   7. Windows 2000 is not supported by WinRAR and WinRAR self-extracting
      modules anymore.

   8. "Save current settings" button in "Advanced SFX options" dialog
      is now available only when converting an existing archive to SFX.
      Options saved with this button are applied only to convert to SFX
      operation.

      If you create or update SFX archive, only SFX options stored
      in default compression profile are used. Options saved
      in "Advanced SFX options" dialog are ignored for these operations.


   Version 4.11

   1. Bugs fixed:

      a) WinRAR did not store NTFS "Compressed" attribute, when creating
         RAR archives;

      b) WinRAR crashed in command line mode if @filelist parameter 
         was present and 'filelist' did not exist. This bug affected
         only WinRAR.exe, not RAR.exe;

      c) if -x*\somefolder\* exclusion mask was specified when archiving 
         and if name of current folder contained 'somefolder', 
         WinRAR excluded all files and stopped creating an archive;

      d) GUI self-extracting archives did not work in Windows
         Preinstallation Environment (Windows PE).

   
   Version 4.10

   1. WinRAR can create ZIP archives of practically any size.

      2 GB archive size and 65535 file number ZIP limitations of previous
      WinRAR versions are not valid anymore.

   2. WinRAR can create multivolume ZIP archives, which are also known as
      split ZIP files.

      ZIP volumes have names like 'volname.zip', 'volname.z01', 'volname.z02'.
      Use a volume with ".zip" file extension in all archive processing
      operations like starting extraction or opening an archive.

      Unlike RAR volumes, ZIP volumes cannot be self-extracting.

      WinRAR needs to have access to all ZIP volumes of multivolume file set
      at the same time, when creating or unpacking them. So it is impossible
      to create or unpack ZIP volumes on removable disks, one volume
      per disk. You need to create them all in the same folder.

   3. Added the high precision file time support in ZIP archives.
      WinRAR can store and extract modification, creation and last access
      file time in ZIP archives with 100 nanosecond precision.

      You need to set "High precision modification time" option in "Time"
      part of archiving dialog to store all 3 times in archive.
      Set appropriate "File time" options in "Advanced" part of extraction
      dialog to choose times to extract.

   4. Added support for Unicode names stored in ZIP extra field data.
      Different ZIP tools store Unicode names either in file header
      or in ZIP extra field and now WinRAR can correctly process both types
      of Unicode names.

   5. "Synchronize archive contents" option and -as command line switch are
      supported in ZIP format.

   6. Modifications of switch -ag behavior:

      a) -ag can be used with all RAR and WinRAR commands, not just
         with archiving only;

      b) 'N' format character behavior differs in archiving and non-archiving
         operations. When archiving, it is incremented until the first unused
         name is found. In non-archiving operations like extracting it selects
         the existing archive preceding the first unused name;

      c) 'I' format character allows to specify minutes regardless of presence
         and position of 'H' (hours) in format string. It can be used
         instead of 'M' (minutes), when you wish to place minutes before hours
         or do not need hours at all.

   7. By default, WinRAR proposes to update an archive if viewer modified
      an opened file or created any new files. New "Ignore modifications for"
      option in "Settings/Viewer" dialog allows to disable such behavior.
      You can enter one or several file masks separated by spaces here
      and WinRAR will not prompt to update an archive if file created
      or modified by viewer matches one of these masks.

   8. Changes in volume size input field. Now you can select size units
      in the drop down list to the right of volume size. Previous way
      to define size modifiers, by entering 'k', 'm', etc. character
      after the numeric size value, is also supported.

   9. Changes in "Predefined sizes" in "Define volume sizes" dialog.
      Floppies and ZIP disks are replaced by 5 MB and 100 MB volumes,
      added new entries for maximum FAT32 file size and for Blu-ray disks.

  10. New "Wipe files if password is set" option in "Options" page of
      archiving dialog. If you prefer to always delete encrypted files
      securely, you can enable "Wipe files if password is set"
      in the default compression profile.

  11. New "Wipe temporary files/Encrypted only" option in "Settings/Security".
      It allows to use a slower and more secure delete for temporary files
      extracted from archives identified by WinRAR as encrypted.
      Quick delete is used for all other temporary files.

  12. Changes in "Convert archives" command:

      a) now it is possible to convert encrypted archives. Previously
         "Convert archives" command skipped them.

         Though, if you still prefer to skip them, you can do it
         by enabling "Skip encrypted archives" option in "Convert archives"
         dialog. It might be useful if you wish to run the conversion
         command in unattended mode, avoiding password prompts;

      b) special "rar2" archive type, which was specific for RAR 1.x
         and 2.x archives, is removed. Now "rar" archive type controls
         conversion of all versions of RAR archives.

         Since the convert command does not need to detect RAR archive
         version anymore, the initial search for archives is performed
         faster, resulting in shorter delay before displaying
         "Convert archives" dialog.

  13. New -log[fmt][=name] switch allows to write archive and file names
      to log file in archiving command for RAR and ZIP formats and also
      in extracting, deleting and listing commands for RAR format.

      This switch is especially useful, when you need to further process
      an archive created with -ag or -v switches, because -log provides
      the archive name generated by WinRAR.

  14. New -@[+] switch allows to process all parameters starting from
      '@' character either as file names (-@) or as file lists (-@+).

  15. "Setup program" SFX options are moved from "General" to "Setup" page
      of "Advanced SFX options" dialog. Both "Run after extraction"
      and "Run before extraction" are now multiline, so it is possible
      to specify several setup programs for same SFX archive.

  16. "SetupCode" SFX script command instructs SFX archive to wait
      for termination of setup program and return the exit code of
      setup program increased by 1000 as the exit code of SFX executable.

      GUI equivalent of this command is "Wait and return exit code" option
      on "Setup" page of "Advanced SFX options" dialog.

  17. SFX does not support "S" (create in the top level of Start Menu)
      "Shortcut" command mode anymore. Recent Windows versions do not allow
      programs to add items to the top of Start Menu.

  18. Volume size in archiving and wizard dialogs can be specified as
      a decimal fraction. Decimal mark is defined by Windows regional
      settings.

      -v<size> command line switch also allows decimal fractions.
      In command line mode the dot (.) is always used as the decimal mark.
      For example, -v1.5g switch means 1.5 gigabytes.


   Version 4.01

   1. Added support for file sizes stored in binary format in TAR archives.
      Some TAR archives use the binary size format instead of octal
      for files larger than 8 GB.
   
   2. Bugs fixed:

      a) "Repair" command failed to properly reconstruct structure
         of RAR archives, which contained at least one file with packed
         size exceeding 4 GB.

         This bug did not affect the recovery record based repair.
         It happened only if recovery record was not found and WinRAR
         performed reconstruction of archive structure;

      b) even if "Do not extract paths" option in "Advanced" part of
         extraction dialog was set as the default, WinRAR still unpacked
         file paths if called from Explorer context menu;

      c) after entering a wrong password for encrypted ZIP archive,
         sometimes WinRAR ignored subsequent attempts to enter a valid
         password;

      d) "Wizard" command did not allow to create self-extracting 
         and multivolume archives, when compressing a single folder
         or a file without extension;

      e) "Import settings from file" command did not restore multiline
         comments in WinRAR compression profiles;

      f) when converting RAR volumes having name1.name2.part#.rar name format,
         "Convert archives" command erroneously removed ".name2" name part.
         So resulting archive had name1.rar file name instead of expected
         name1.name2.rar;

      g) RAR could crash when creating a new archive with -agNNN switch
         if archive number in generated name was 110 or larger;

      h) WinRAR failed to display non-English file names in 7-Zip archives
         properly if they used a non-default code page. It was the display
         only problem, such names were unpacked correctly.


   Version 4.00

   1. RAR decompression speed is improved. Depending on data type,
      decompression can be up to 30% faster than in previous versions.

      Both the general RAR algorithm and most of special RAR multimedia
      methods benefit from this improvement. The only module of RAR
      algorithm, which is not affected, is "Text compression" method.

   2. Changes in ISO support:

      a) UDF support is upgraded to UDF 2.50 revision. It makes possible
         to unpack most of Blu-ray ISO files;

      b) when browsing UDF ISO file, UDF revision number is displayed
         after the "UDF" format name in WinRAR address bar
         and in archive information dialog;

      c) WinRAR sets the folder modification date when unpacking folders
         stored in UDF and ISO9660 files.
   
   3. Changes in password dialog:

      a) WinRAR uses the same format of password dialog both when archiving
         and extracting, so "Show password" option is available also
         when extracting;

      b) "Organize passwords..." button in password dialog provides
         access to password organizer interface, where you can specify
         your frequently used passwords. You will be able to access these
         saved passwords using the drop down list or autocomplete feature
         in password dialog.

         It is important to know that saved passwords are not encrypted
         and anybody having access to your computer can view them.
         Use "Organize passwords" feature only if your computer is
         protected from unauthorized access;

      c) "Use for all archives" option is available in password dialog
         when unpacking several archives at once. You can utilize it
         to apply an entered password to all archives.

         If you use this option with an empty password, WinRAR will skip
         all encrypted archives;

      d) Unlike previous versions, the password from default compression
         profile is not used for extraction.
         
         If you wish to use the same password for all extracting archives,
         press "Organize passwords..." button in the password dialog
         and define a new password entry, specifying "*" file mask 
         in "Select for archives" field.
   
   4. In Windows 7 WinRAR will display the total operation progress
      also on WinRAR icon on Windows taskbar. You can disable it using
      "Taskbar progress bar" option on "General" page of WinRAR settings.

   5. Numerous Unicode support improvements allow to process non-English
      file names more smoothly. These improvements include:

      a) better Unicode handling in WinRAR in "Rename", "Convert",
         "Find" and other commands, in folder tree panel, in password 
         request dialog and in many other parts of WinRAR interface;

      b) correctly displayed Unicode names in WinRAR items in Explorer
         context menus;

      c) Unicode support in .lng files, making WinRAR localization
         possible for Unicode only languages.
   
   6. Changes in -x<file> switch syntax. Now you can specify a wildcard
      exclusion mask for folders. Such mask must have the trailing '\'
      character, like -x*tmp*\ or -x*\temp\

   7. New "Extract relative paths" option in "Advanced" part of extraction
      dialog. If you browse some archive subfolder in WinRAR shell
      and enable "Extract relative paths" option, the path part up to
      and including the current subfolder will be removed from extracted
      file paths.
      
      For example, if you are inside of "Backup\MyData" archive folder
      and extract "Images" folder, it will be extracted as "Images",
      not as "Backup\MyData\Images".

      This option is the new default extraction mode, but you can change
      the default back to WinRAR 3.x style. Just select "Extract full paths"
      and then press "Save settings" in "General" part of extraction dialog.
   
   8. Windows 98, Windows Me and Windows NT are not supported by WinRAR
      and WinRAR self-extracting modules anymore. Minimum Windows version
      required for WinRAR 4.0 is Windows 2000.
      
      If you need to run WinRAR on older Windows, you can download
      previous WinRAR versions from ftp://ftp.rarlab.com/rar

   9. If TAR, TAR.GZ or TAR.BZ2 archive contains symbolic or hard links
      and if destination file system is NTFS, WinRAR will create these
      links when unpacking such archive. WinRAR will create symbolic links
      as symbolic and hard links as hard in Windows Vista and newer
      and it will create all links as hard in older Windows.

      If destination file system is FAT32 or any other not supporting
      file links, WinRAR will skip links when unpacking TAR, TAR.GZ
      and TAR.BZ2 archives.
   
  10. Recovery volume processing involves less disk seek operations
      resulting in higher performance.

  11. You can select Windows 7 library in tree panel in extraction dialog
      and WinRAR will use its default save location as the destination path.

  12. "Report" command allows to select HTML, Unicode text and usual text
      as output format for report file. Unlike previous WinRAR versions,
      now WinRAR preservers Unicode characters in reports when using HTML
      or Unicode text format. So non-English characters in file names
      will be displayed properly in such reports.
   
  13. Message list in GUI SFX archives displays only operation status
      and error messages. It does not contain names of all extracted files
      anymore. This change improves the speed and reduces memory requirements
      for SFX archives containing a large number of files. Also it makes
      easier to locate error messages, because they are not hidden among
      extracted file names.

  14. GUI SFX archives display "Extract" button instead of "Install"
      if no "Setup" or "Presetup" commands are present in the archive
      comment. If you prefer "Install" button, but do not need to
      execute any setup programs, you can add "Setup=<>" command.
  
  15. WinRAR displays the current percent above the operation progress bar
      when repairing an archive containing the recovery record
      and when processing recovery volumes.

  16. WinRAR limits the maximum possible volume size to 4 GB minus 1 byte
      when creating RAR volumes on a disk with FAT or FAT32 file system
      in volume size autodetecting mode. These file systems do not support
      4 GB and larger files.

  17. If "Wait if other WinRAR copies are active" option is enabled
      and WinRAR waits for another copy, you can press "Continue" button
      in command progress window to force WinRAR to stop waiting.
      So now "Continue" button allows to override the state of
      "Wait if other WinRAR copies are active" option for current operation.

  18. WinRAR displays one password request instead of two, when saving
      an encrypted file back to RAR or ZIP archive after modifying it
      in some external editor. Previous WinRAR versions usually requested
      the password twice, both when extracting the original file
      and archiving its modified copy. Only RAR archives with encrypted
      file names were processed with the single password prompt.

  19. New error code 10 ("no files") is added to list of error codes
      returned in command line mode by RAR and WinRAR. This new code
      can be returned by archive, extract, delete and repair commands.
      It means that RAR did not find any files matched the specified
      file or archive mask.
  
  20. File name area in file overwrite dialog occupies several lines now.
      It makes possible to display much longer names.
  
  21. Now switch -ep3 converts not only disk letters, but also UNC paths.
      So \\server\share will be converted to __server\share when archiving
      and restored to the original \\server\share when extracting with -ep3.

  22. New "Background extraction" option in "Advanced" part of extraction
      dialog places WinRAR into background, when extracting files.
      You can save its default state with "Save settings" button in "General"
      part of extraction dialog, just like for other extraction options.

      "Background archiving" option from the default compression profile
      does not affect the extraction behavior anymore.

  23. "Mode..." button in operation progress window is enabled also
      when extracting or testing archives. It provides access to 
      "Command parameters" dialog, where you can set "Turn PC off when done"
      option for extraction and test operations.

      Previously this dialog was accessible only when archiving.

  24. Bugs fixed:

      a) renaming a file in archive could also rename all other files
         with the same name in other folders of the same archive;

      b) previous versions displayed the wrong total packed size
         in "Info" command for multivolume CAB archives;

      c) in ZIP archives 'U' (update) and 'F' (fresh) commands could
         erroneously update even files not specified in the command line.
         It happened only for files in current folder which names matched
         files in ZIP archive. This bug was not present in usual 'A' (add)
         archiving mode.
